Aerospace High Temperature Silicone Fiberglass Reinforced Rubber Sheet .050x9x12

Description

One (1) Sheet Aerospace High Temperature Silicone Rubber Fiberglass Reinforced Size .050”x9”x12”
You are purchasing One (1) Sheet of Aerospace Grade High Temperature Silicone Rubber Fiberglass Reinforced Sheet Size 0.050 inches Thick, 9” x 12”.  One picture shows 5 sheets together so you have a feel for the thickness compared to the length and width.
This sheet material was originally used as caul plate material in Aerospace Composites Manufacture where high temperature and pressure are used and excellent release properties are needed.  It is constructed with 3 plys of Style 1523 fiberglass fabric coated with a flame retardant red silicone rubber.  It is IDEAL for High Temperature applications.  It can be used for gaskets or seals requiring a resilient, non-porous high-temperature, flame-retardant silicone suitable for operating temperatures from -100 to 500°F. It resists deterioration due to weathering and will remain flexible over its temperature range.
Three (3) Style 1523 fiberglass fabric plys are centered between 4 layers of silicone that gives the material great dimensional stability and tensile strength.  I cut an edge of a small piece of the material on an angle to show the 3 plys of fiberglass and included a photograph for you to see.
While I cannot say this material is “Food Grade Silicone” I would not hesitate to use a sheet of this material to bake cookies in my oven.  No worries about fiberglass entering the food since both sides are coated in silicone.
PLEASE NOTE:
I can ship several 9” x 12” sheets of this material in the same flat rate envelope to save on shipping.  You will NOT receive selvage in 9”x12” sheets.
MATERIAL SPECIFICATIONS
Manufacturer: Fabri Cote, Los Angeles, CA
Reinforcement: 3 Ply Style 1523 Fiberglass (see photograph of edge)
Thickness: 0.050 inch (50 mils)
Weight:  60 oz/Sq Yd
Working Temperature Range: -100 deg F to +500 deg F
Hardness, Shore A Durometer: 70
Color: Red
Surface Finish: Fabric Texture (see close up photograph of surface)
APPLICATIONS
Excellent for Gasketing and Seal Material
Applications requiring higher dimensional stability and tensile strength
Applications that require a high degree of “release” or “non-stick”
High Temperature applications
FEATURES
Extreme High & Low Temperature Resistance
Ozone resistance
Excellent Release Properties
Good compression set characteristics
Radiation resistance
Dimensional stability